Trimble Terra TN 200 D VOR/ILS

Description

Trimble Terra TN 200 D VOR/ILS. This is a "digital" VOR with Glide Slope and Localizier. This picture was taken within the last week, in flight. The radio is on the left, the VOR/ILS display on the right. "To/From" radials are directly displayed, digitally. An "OBS" is displayed as a left/right series of course deviation bars. The same is true for the localizer and glide slope indicators. There is a holding pattern timer function as well. The radio tuner has active/standby frequencies as well as memory presets for your most used frequencies. The radio also provide audio monitoring for station ID and received coms. The condition is used and the device was working when taken from the aircraft but the unit is sold as is.  I am going through a panel upgrade and needed the space. This unit has always been reliable. Unfortunately, the VOR antenna is built into the canard of my Long EZ. A BNC cable connector is included but you will need to provide your own antenna.
This sale is for both the receiver and CDI. I did not use a rack for mounting. The two units together weigh under three pounds and the face plate mounting screws were enough to support them. This is a 12V system. There is a harness between the two components that is pre-wired. The only hookups you'll need to do (other than the antenna) are power/GND and a single audio output to your intercom system.
I will send the buyer PDF installation/operation guides.